Solutions / FAQ's

Experiencing an oil leak? Frustrated at a blown head gasket? Want a smoother steering? No worries!  In just a few words, type the problem or a desired solution to your problem below!




Will Rislone HEAD GASKET FIX plug my heater core?

Problem:

Will Rislone Head Gasket Fix plug my heater core?

Solution:

No, Rislone Head Gasket Fix will not clog your clean heater core, it is safe and effective.

Note: If using Rislone Head Gasket Fix to stop heater core leaks, make sure you turn your heater control to HOT. Some vehicles have a valve that controls coolant flow through the core.

Related Products:

Rislone Head Gasket Fix (41111)


I accidently added the Rislone HEAD GASKET FIX into my engine oil, what should I do?

Problem:

I accidently added the Rislone HEAD GASKET FIX into my engine oil, what should I do?

Solution:

Rislone Head Gasket Fix is only designed to be added to the cooling system. If the product is installed in the engine oil and the engine has not been started, in many cases you can remove the valve cover and drain the oil leaving the drain plug off. Then use an engine flush washing out the head keeping special attention to the oil return holes that run down to the oil pan. Clean these out and pour the engine flush down these holes flushing everything into the oil pan and out the drain hole. If the engine has been run, you need to take the vehicle to have a professional mechanic evaluate what can be done to clean the inside of the engine. This might include taking the engine apart to clean all of the parts.

Related Products:

Rislone Head Gasket Fix (41111)


I accidently added the Rislone HEAD GASKET FIX into my petrol tank, what should I do?

Problem:

I accidently added the Rislone HEAD GASKET FIX into my gas tank, what should I do?

Solution:

Rislone Head Gasket Fix is only designed to be added to the cooling system. If the product is installed in the petrol tank, the tank should be removed and cleaned out by a professional mechanic.

Related Products:

Rislone Head Gasket Fix (41111)


What are the dosage recommendations for HEAD GASKET FIX?

Problem:

What are the dosage recommendations for HEAD GASKET FIX?

Solution:

One 680 g bottle treats 4, 6 or 8 cylinder vehicles.

Related Products:

Rislone Head Gasket Fix (41111)


Do I need to drain my radiator after the leak has been repaired by HEAD GASKET FIX?

Problem:

Do I need to drain my radiator after the leak has been repaired?

Solution:

No, top off radiator and leave Rislone HEAD GASKET FIX in cooling system for continued protection and drive vehicle as normal.

Related Products:

Rislone Head Gasket Fix (41111)


Does Rislone HEAD GASKET FIX permanently repair leaks?

Problem:

Does Rislone HEAD GASKET FIX permanently repair leaks?

Solution:

Yes, it is a permanent solution for your cooling system leaks.

Related Products:

Rislone Head Gasket Fix (41111)


How do I install HEAD GASKET FIX if I don’t have direct access to the radiator?

Problem:

What if I don’t have direct access to the radiator?

Solution:

If you do not have direct access to your radiator, remove top hose where it connects to the top of the radiator and install product in hose. Reattach hose and tighten clamp.

Related Products:

Rislone Head Gasket Fix (41111)


How does HEAD GASKET FIX work

Problem:

How does this type of product work?

Solution:

This formulation contains a combination of antifreeze compatible sodium silicate sealing liquid and various size gasket sealing particles which penetrate gaps & cracks and harden to permanently stop leaks.

Related Products:

Rislone Head Gasket Fix (41111)


Can HEAD GASKET FIX be installed in a diesel engine?

Problem:

Can HEAD GASKET FIX be installed in a diesel engine?

Solution:

Yes, it works with ALL petrol and diesel engines. This heavy duty formula works on aluminum and cast iron heads & blocks, along with sealing all other engine cooling system leaks better than a traditional stop leak. This includes repairing head gaskets, cylinder heads, intake gaskets, cracked blocks and freeze plugs.

Related Products:

Rislone Head Gasket Fix (41111)


[FAQ] Can Rislone HEAD GASKET FIX be installed in existing antifreeze?

Problem:

Can Rislone HEAD GASKET FIX be installed in existing antifreeze?

Solution:

Yes, it is compatible with ALL types and brands of antifreeze including conventional green or blue (Silicate-Based) and extended life red/orange or yellow (OAT/HOAT) coolant. Also works in systems containing only water. Systems that are dirty or partially clogged, a flush is recommended before use.

Related Products:

Rislone Head Gasket Fix (41111)


Can Rislone Compression Repair be used in a 4-cycle ATV and Motorcycle engines with a wet clutch?

Problem:

Can Rislone Compression Repair be used in a 4-cycle ATV and Motorcycle engines with a wet clutch?

Solution:

Yes, Rislone Combression Repair can be used ina 4-cycle (4 stroke) ATV and Motorcycle engine with a wet clutch since the product does not use any fritction modifiers which could potentially make the clutches slip. Use approximately 120ml of Rislone Compression Repair per 946ml of engine capacity.

Related Products:

Rislone Compression Repair with Ring Seal (44447)


[FAQ] Can I use Rislone Compression Repair in my diesel engine?

Problem:

Can I use Rislone Compression Repair in my diesel engine?

Solution:

Yes, it is compatible with both gasoline and diesel engines.

[faq ref: 45]

Related Products:

Rislone Compression Repair with Ring Seal (44447)


[FAQ] Will Rislone work in synthetic oil?

Problem:

Will Rislone work in synthetic oil?

Solution:

Yes, Rislone works with all petroleum-based motor oils including conventional, high mileage and synthetic formulas.

[faq ref: 44]

Related Products:

Rislone Compression Repair with Ring Seal (44447)


[FAQ] How does Rislone Compression Repair with Ring Seal work?

Problem:

How does Rislone Compression Repair with Ring Seal work?

Solution:

Rislone Compression Repair with Ring Seal works two ways to solve low compression problems.  First, chemical polymers work to fill in scratches and grooves in cylinder walls caused by normal wear, age and high mileage.  Secondly, frees sticking rings in piston grooves to allow the rings to properly seal increasing compression.

[faq ref: 43]

Related Products:

Rislone Compression Repair with Ring Seal (44447)


[FAQ] What is Rislone Compression Repair with Ring Seal?

Problem:

What is Rislone Compression Repair with Ring Seal?

Solution:

Rislone Compression Repair with Ring Seal is a concentrated proprietary blend of petroleum additives developed for higher mileage engines that are suffering from decreased or uneven compression.  It contains a unique engine additive that repairs worn out areas in the cylinder wall thereby restoring cylinder compression and improving engine performance to nearly new original condition.

[faq ref: 42]

Related Products:

Rislone Compression Repair with Ring Seal (44447)


[FAQ] What are the signs of decreased compression?

Problem:

What are the signs of decreased compression?

Solution:

Some signs of decreased compression include loss of power, poor fuel mileage, oil consumption, blue smoke from the exhaust, plug fouling and enging noise or vibrations.

Use Risline Cylinder Compression Repair with Ring Seal to restore compression.

[faq ref: 41]

Related Products:

Rislone Compression Repair with Ring Seal (44447)


[FAQ] What are the most common causes of low engine compression?

Problem:

What are the most common causes of low engine compression?

Solution:

Low compression can be caused by normal engine wear and decreased sealing between the piston rings and cylinder walls.  This can be the result of scratches in the cylinder walls or sticking rings in the pistons which allow compression to move from the top of the cylinder down into the crankcase below the piston.

Use Risline Cylinder Compression Repair with Ring Seal to restore compression.

[faq ref: 40]

Related Products:

Rislone Compression Repair with Ring Seal (44447)


[FAQ] Will Rislone Ring Seal harm my engine?

Problem:

Will Rislone Ring Seal harm my engine?

Solution:

No, the product is completely safe to use and will not harm any part of your engine.

[faq ref: 39]

Related Products:

Rislone Ring Seal Smoke Repair (44416)


[FAQ] How often should I add Rislone Ring Seal?

Problem:

How often should I add Rislone Ring Seal?

Solution:

Add Rislone Ring Seal every 3000 km or with every oil change.

[faq ref: 38]

Related Products:

Rislone Ring Seal Smoke Repair (44416)


[FAQ] How much Rislone Ring Seal do I use?

Problem:

How much Rislone Ring Seal do I use?

Solution:

The Rislone Ring Seal is designed to treat 4 to 6 litres of engine oil.

[faq ref: 37]

Related Products:

Rislone Ring Seal Smoke Repair (44416)


[FAQ] Can I use Rislone Ring Seal in my diesel engine?

Problem:

Can I use Rislone Ring Seal in my diesel engine?

Solution:

Yes, it works with all gasoline and diesel engines using conventional, high mileage and synthetic oil.

[faq ref: 36]

Related Products:

Rislone Ring Seal Smoke Repair (44416)


[FAQ] How long does it take for Rislone Ring Seal to start working?

Problem:

How long does it take for Rislone Ring Seal to start working?

Solution:

Results will either be immediate or noticeable within a few days of driving.

[faq ref: 35]

Related Products:

Rislone Ring Seal Smoke Repair (44416)


[FAQ] How does Rislone Ring Seal work?

Problem:

How does Rislone Ring Seal work?

Solution:

Rislone Ring Seal contains viscosity improvers that thicken the oil film, filling in gaps cased by blow-by.  It also contains high-shear polymers which provide a seal for worn pistons & rings to stop blow by from occurring.  These polymers cushions and coats engine parts helping to reduce wear and quiet noisy lifters.

[faq ref: 34]

Related Products:

Rislone Ring Seal Smoke Repair (44416)


[FAQ] I accidently added the Rislone Engine Treatment into my gas tank, what should I do?

Problem:

I accidently added the Rislone Engine Treatment into my gas tank, what should I do?

Solution:

Rislone Engine Treatment is only designed to be added to the engine crankcase.  If the product is installed in the gas tank, the tank should be removed and cleaned out by a professional mechanic.

[faq ref: 33]

Related Products:

Rislone Engine Treatment (44100)


[FAQ] How long does it take for Rislone Engine Treatment to start working?

Problem:

How long does it take for Rislone Engine Treatment to start working?

Solution:

Rislone Engine Treatment starts working the minute you install and start driving the vehicle to help remove harmful gum, sludge, and deposits from your engine.

[faq ref: 32]

Related Products:

Rislone Engine Treatment (44100)


[FAQ] Does Rislone Engine Treatment contain chlorine or any chlorine like additives?

Problem:

Does Rislone Engine Treatment contain chlorine or any chlorine like additives?

Solution:

No, Rislone does not condone or product any engine additive products with chlorine.  We are aware of other additive companies which use chlorine and it shows to reducer wear in laboratory testing, but can do damage to engine bearings and other components in real world testing.

[faq ref: 31]

Related Products:

Rislone Engine Treatment (44100)


[FAQ] Is Rislone Engine Treatment safe for my newer vehicle?

Problem:

Is Rislone Engine Treatment safe for my newer vehicle?

Solution:

Yes, Rislone Engine Treatment has the lubricating and protective capabilities of current motor oils, plus additional penetrating properties which do a superior job of maintaining long term cleanliness and deposit control.  Use of Rislone Engine Treatment will not void your new car warranty.

[faq ref: 30]

Related Products:

Rislone Engine Treatment (44100)


[FAQ] How much Rislone Engine Treatment do I install?

Problem:

How much Rislone Engine Treatment do I install?

Solution:

1 bottle of Rislone Engine Treatment is designed to treat 4 to 6 litres of oil, this allows you to replace a litre of motor oil at oil change time.  You can also use it to 'top off' your system between oil changes.

[faq ref: 29]

Related Products:

Rislone Engine Treatment (44100)


[FAQ] Will Rislone Engine Treatment work in synthetic oil?

Problem:

Will Rislone Engine Treatment work in synthetic oil?

Solution:

Yes, Rislone works with all petroleum-based motor oils including conventional, high mileage and synthetic.  Rislone is also safe for use with PTFE-based engine treatments and will not alter the PTFE coating.

[faq ref: 27]

Related Products:

Rislone Engine Treatment (44100)


[FAQ] Do I have to flush my oil after using Rislone Engine Treatment?

Problem:

Do I have to flush my oil after using Rislone Engine Treatment?

Solution:

No, Rislone Engine Treatment is formulated to be left safely in the crankcase for the life of the oil change for maximum performance.  It is not an engine flush and does not require draining.

[faq ref: 26]

Related Products:

Rislone Engine Treatment (44100)


[FAQ] How does Rislone Engine Treatment work?

Problem:

How does Rislone Engine Treatment work?

Solution:

Rislone Engine Treatment gradually dissolves and removes harmful deposits of varnish, sludge and gum from internal metal parts without plugging oil passages.  These deposits form within engines and can alter tolerances, stick valves and rings, cause noisy valves and lifters, and plug oil screens and passages.  Regular use of Rislone Engine Treatment, with oil and filter changes at the proper intervals, will keep such deposits to a minimum.

[faq ref: 28]

 

Customer Feedback

"Hello, I would like to give product feedback. I own a 2.4l 4cyl Mitsubishi Triton with 260k's on the clock (original engine). The engine is in very good condition except for constant lifter noise. (Which I have heard from my research these engines are prone to).Well the story goes: I intially tried flushing the engine several times with another brand of engine flush along with short (3k) oil/filter changes. Also I added various other additives on different occasions. This helped a little bit (maybe 10%) I eventully got sick of the noise and removed and cleaned all 16 hydraulic lash adjusters (HLA's) myself. This really cured the problem perfectly.... for about a month then the noise slowly come back. I gave up. Then a year later on a oil change, I flushed again, new oil/filter and this time tried Rislone Engine Treatment. After the first 20-30k's the noise started to change, after 100k's it appears the noise is very intermitent but a lot quieter. Its a 80% improvement! I wonder how it will be after several hundred k's with these great results early on.
I did not get this response from the other additives even after 3000k's in the sump.
Thank you for making this high km engine perform close to new!"
Colin, Australia

Related Products:

Rislone Engine Treatment (44100)


[FAQ] Can I use Rislone Engine Oil Supplement with Zinc Treatment in my diesel engine?

Problem:

Can I use Rislone Engine Oil Supplement with Zinc Treatment in my diesel engine?

Solution:

Yes, it is recommended to use at a 20% ratio for all 2006 and older diesel engines.

[faq ref: 25]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] How long does Rislone Engine Oil Supplement with Zinc Treatment last?

Problem:

How long does Rislone Engine Oil Supplement with Zinc Treatment last?

Solution:

When used in combination with good quality motor oil, Rislone Engine Oil Supplement with Zinc Treatment will last until your next oil change.  Follow the manufacturers recommended oil change intervals for your particular vehicle and make sure to add with each oil change.

[faq ref: 24]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] When should I add the Rislone Engine Oil Supplement with Zinc Treatment to my engine?

Problem:

When should I add the Rislone Engine Oil Supplement with Zinc Treatment to my engine?

Solution:

For best protection, use RIslone Engine Oil Supplement with Zinc Treatment with every oil change.  Also can be used to top off oil as needed to improve engine protection between oil changes.

[faq ref: 23]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] How much Rislone Engine Oil Supplement With Zinc Treatment do I install?

Problem:

How much Rislone Engine Oil Supplement With Zinc Treatment do I install?

Solution:

Note: Do not overfill

GASOLINE ENGINES (Cars and Light Trucks)

1996 and older - Add 1 bottle to engine crankcase.

1997 to 2004 - Add approximately 1/2 bottle to engine.

DIESEL ENGINES (Light, Medium & Heavy-Duty)

2006 and older - Add 1 bottle to engine crankcase for every 5 litres of oil capacity.

OTHER APPLICATIONS

For 4 stroke motorcycles, agricultural, industrial and racing applications use at 20% crankcase capacity.  For example if your engine holds 5 litres of motor oil, use 4 bottles of oil and 1 litre of Rislone.

[faq ref: 22]

 

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] Will Rislone Engine Oil Supplement with Zinc Treatment work in synthetic oil?

Problem:

Will Rislone Engine Oil Supplement with Zinc Treatment work in synthetic oil?

Solution:

Yes, Rislone works with all petroleum based engine oils including conventional, high mileage and synthetic formulas.

[faq ref: 21]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] How can the Rislone Engine Oil Supplement with ZInc Treatment help prevent dry starts?

Problem:

How can the Rislone Engine Oil Supplement with ZInc Treatment help prevent dry starts?

Solution:

Rislone Engine Oil Supplement with Zinc Treatment contains copolymer esters (Tackifier) that have an affinity (attraction) for metal surfaces.  This allows the oil to hold onto the metal surface instead of just running off like normal motor oil does over time.  This along with the ZDDP creates a double layer of proteciton.

[faq ref: 20]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] How is Rislone Engine Oil Supplement with Zinc Treatment different than break in additives?

Problem:

How is Rislone Engine Oil Supplement with Zinc Treatment different than break in additives?

Solution:

Break in additives contain extremely high concentrations of ZDDP and are only designed to be left in the engine for a short period of time.  Many of these additives don't contain detergents or other lubricity additives important to keeping your engine clean and lubricated for thousands of miles.  Rislone Engine Oil Supplement with Zinc Treatment not only contains the correct amount of ZDDP, but also the other additives important to protecting your engine.  Do not use as a break in additive.

[faq ref: 19]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] Can I use Rislone Engine Oil Supplement with Zinctment in my newer vehicle?

Problem:

Can I use Rislone Engine Oil Supplement with Zinc Treatment in my newer vehicle?

Solution:

No, you should not use the Rislone Engine OIl Supplement with Zinc Treatment in 2005 or later petrol and 2007 or later diesel engines.  Current oils have enough Zinc to protect moving parts inside newer engines. 

However, to help prevent sludge and keep that engine clean, it is recommended to use Rislone Engine Treatment on all newer engines.

[faq ref: 18]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)

Rislone Engine Treatment (44100)


[FAQ] What are the benefits of Rislone Engine Oil Supplement with Zinc Treatment?

Problem:

What are the benefits of Rislone Engine Oil Supplement with Zinc Treatment over other engine additives?

Solution:

Some additives are designed for break-in use only.  Other additives make wild claims about coating the inside of the engine with Teflon type additives, but no real proof has been established to back up these claims.  Rislone Engine Oil Supplement with Zinc Treatment uses proven ZDDP technology along with our 90 plus years of oil additive knowledge to protect the moving parts of your engine to be used after break-in.

[faq ref: 17]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] How does Rislone Engine Oil Supplement with Zinc Treatment work?

Problem:

How does Rislone Engine Oil Supplement with Zinc Treatment work?

Solution:

The common element between all of the engine components is the oil.  Oil is the life-blood of the engine and is pumped under pressure to the internal parts.  Engine oils are generally used to reduce friction between moving parts.  In addition to lubricating, motor oil must cool, provide corrosion protection and a method of removing contaminants.  The main parts needing oil for lubrication is the valve train including the camshaft and lifters, bearings and pistons.  When installed, Rislone Engine Oil Supplement with Zinc Treatment cools and lubricates these moving parts better than oil alone.  The clinging properties hold the oil to metal parts preventing wear and dry starts.  Special additives also prevent oil thinning at high temperatures where normal oil fails.  The ZDDP creates the sacrificial (disposable) layer on any components where metal to metal contact happens preventing the metal itself from being worn away.

[faq ref: 16]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] Why do I need ZDDP?

Problem:

Why do I need ZDDP?

Solution:

Over the years motor oils have been updated to meet the needs of changing engine designs.  In the past the oil companies were able to do this and keep the engine oil backward compatible, meaning this engine oil worked on new and old engines.  However, now with the reduction of Zinc in the oil, these oils sold today do not offer the protection needed for older engines.

[faq ref: 15]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] What is ZDDP?

Problem:

What is ZDDP?

Solution:

ZDDP, also called ZDP, is short for zinc dialkyldithiophosphate, is basically a combination of zinc and phosphorus.  When put under pressure, like between a flat tappet camshaft and a lifter, it attaches to the metal surface and becomes a sacrificial wear material.  Beyond being an anti-wear additive, it also is a corrosion inhibitor.

[faq ref: 14]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] What is Rislone Engine Oil Supplement with Zinc Treatment?

Problem:

What is Rislone Engine Oil Supplement with Zinc Treatment?

Solution:

Rislone Engine Oil Supplement with Zinc Treatment is a petroleum oil performance supplement "booster" containing high levels of ZDDP (zinc dialkyldithiophosphate) Zinc and Phosphorus additives to help better protect internal engine components including pistons, flat tappet camshafts, lifters and the valve train.  This is especially important at engine start up, when most wear is done.  That is why they say one of the worst things you can do is start your engine.

[faq ref: 13]

Related Products:

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[FAQ] Can I use the Rislone Fuel Injector Cleaner in E-85 ethanol in my flex-fuel vehicle

Problem:

Can I use the Rislone Fuel Injector Cleaner in E-85 ethanol in my flex-fuel vehicle?

Solution:

Yes, Rislone Fuel Injector Cleaner works with the E-85 and will lubricate the fuel system reducing the negative effects that ethanol has on the system.

[faq ref: 12]

Related Products:

Rislone Injector Cleaner with Fuel Conditioner & Treatment (44701)

Rislone Injector Cleaner with Fuel Conditioner & Treatment (4732)


[FAQ] Will Rislone Fuel Injector Cleaner harm the oxygen sensors or plug the catalytic converter

Problem:

Will Rislone Fuel Injector Cleaner harm the oxygen sensors or plug the catalytic converter?

Solution:

No, It will not harm your engine or any emissions components including catalytic converters, oxygen sensors, or the EGR valve.

[faq ref: 11]

Related Products:

Rislone Injector Cleaner with Fuel Conditioner & Treatment (44701)

Rislone Injector Cleaner with Fuel Conditioner & Treatment (4732)


[FAQ] Can the Rislone Fuel Injector Cleaner replace the lubricant in the ULSD

Problem:

Can the Rislone Fuel Injector Cleaner replace the lubricant in the ULSD (Ultra Low Sulfur Diesel Fuel)?

Solution:

Yes, Rislone Fuel Injector Cleaner is an execellent lubricant and will replace the lost additives in the new reformulated diesel fuel.

[faq ref: 10]

Related Products:

Rislone Injector Cleaner with Fuel Conditioner & Treatment (44701)

Rislone Injector Cleaner with Fuel Conditioner & Treatment (4732)


[FAQ] How much will my fuel mileage improve after using Rislone Fuel Injector Cleaner

Problem:

How much will my fuel mileage improve after using Rislone Fuel Injector Cleaner?

Solution:

This varies depending on the age of the vehicle, the quality of the fuel used, and how dirty the system is.  It is normal for larger increaes in MPG on the first dosage and then it will usually taper off and flatten out from the second dosage on.  For best results use with every tank of fuel.

[faq ref: 9]

Related Products:

Rislone Injector Cleaner with Fuel Conditioner & Treatment (44701)

Rislone Injector Cleaner with Fuel Conditioner & Treatment (4732)


[FAQ] How can Rislone Fuel Injector Cleaner reduce a noisy fuel system

Problem:

How can Rislone Fuel Injector Cleaner reduce a noisy fuel system?

Solution:

The Upper Cylinder Lubricant additive lubricates the fuel pump, injectors and upper cylinder to reduce friction & wear, reducing noise.

[faq ref: 8]

Related Products:

Rislone Injector Cleaner with Fuel Conditioner & Treatment (44701)

Rislone Injector Cleaner with Fuel Conditioner & Treatment (4732)


[FAQ] How does Rislone Fuel Injector Cleaner work

Problem:

How does Rislone Fuel Injector Cleaner work?

Solution:

Rislone Fuel Injector Cleaner contains a unique blend of additives that clean and lubricate the entire fuel system, including fuel tanks, lines injectors, and even carburettors on older vehicles.

[faq ref: 7]

Related Products:

Rislone Injector Cleaner with Fuel Conditioner & Treatment (44701)

Rislone Injector Cleaner with Fuel Conditioner & Treatment (4732)


[FAQ] What does Rislone Fuel Injector Cleaner do

Problem:

What does Rislone Fuel Injector Cleaner do?

Solution:

Wth continued use of Rislone Fuel Injector Cleaner, it reduces carbon build-up which causes pre-ignition, power loss, burned valves and broken rings.  It also cleans injectors to reduce loss of fuel economy, hesitation, pinging (spark knock), and helps restore performance.

[faq ref: 6]

Related Products:

Rislone Injector Cleaner with Fuel Conditioner & Treatment (44701)

Rislone Injector Cleaner with Fuel Conditioner & Treatment (4732)


[Solution] How to stop the vibration through steering wheel

Problem:

Vibration through steering wheel

Solution:

Rislone Power Steering Repair  will stop your steering wheel from vibrating.

[solution ref: 18]

Related Products:

Rislone Power Steering Repair (44650)


[Solution] How to stop minor leaks for automatic transmissions

Problem:

Minor leaks for automatic transmissions

Solution:

Either use Rislone Automatic Transmission Repair or Rislone Transmission Stop Slip with Leak Repair.

[solution ref: 17]

 

Related Products:

Rislone Automatic Transmission Repair (44540)

Rislone Transmission Stop Slip with Leak Repair (44502)


[Solution] How to reduce harsh gear ghanging for automatic transmissions

Problem:

Harsh gear changing for automatic transmissions

Solution:

Rislone Automatic Transmission Repair will reduce harsh gear changing and friction.

[solution ref: 16]

Related Products:

Rislone Automatic Transmission Repair (44540)


[Solution] How to quiet general engine noise

Problem:

General engine noise

Solution:

Either use the Rislone Engine Repair or Rislone Engine Treatment.

[solution ref: 15]

Related Products:

Rislone Engine Repair (44110)

Rislone Engine Treatment (44100)


[Solution] How to stop coolant loss

Problem:

Coolant loss

Solution:

Rislone Head Gasket Fix is the easiest solution to stop head gasket coolant leaks.   You may also use the Rislone Professional Head Gasket & Cooling Sealant which is the strongest antifreeze compatible repair on the market. A key benefit of this product is the material stays in the cooling system to seal up any future minor cooling system leaks the vehicle might have.

Alternatively, Rislone Radiator Stop Leak & Conditioner (for 4,6,8 or 10 cylinder engines) will stop your radiator from leaking.

[solution ref: 14]

Related Products:

Rislone Head Gasket Fix (41111)

Rislone Radiator Stop Leak & Conditioner (41194)


[FAQ] General Engine Protection

Problem:

What should I use for general engine protection?

Solution:

Rislone Engine Treatment will gradually dissolve and remove harmful deposits of varnish, sludge and gum from the internal metal parts without plugging oil passages.  These deposits form within engines and can alter tolerances, stick valves and rings, cause noisy valves and lifters, and plug oil screens and passages.  Regular use of Rislone Engine Treatment, with oil and filter changes at the proper intervals, will keep such deposits to a minimum. 

Alternatively, Rislone Oil Supplement with ZDDP Treatment can also be used.  The Zinc and Phosphorous (ZDDP) treatment will put back into new oils what the older oils contained to properly lubricate and protect those gasoline and diesel engines.

Both are the recommended products to use for general engine protection.

[faq ref: 5]

Related Products:

Rislone Engine Treatment (44100)

Rislone Engine Oil Supplement with Zinc Treatment (4401)


[Solution] How to stop excessive smoke from exhaust

Problem:

How do I stop excessive smoke from exhaust?

Solution:

Rislone Ring Seal is formulated to help stop exhaust smoke, reduce oil burning and prevent plug fouling caused by “blow-by”. Blow-by is usually caused by gaps in internal engine parts resulting from excess wear. Ring Seal contains viscosity improvers that thicken the oil film filling these gaps.

[solution ref: 13]

Related Products:

Rislone Ring Seal Smoke Repair (44416)


[Solution] How to eliminate exhaust smoke on start up

Problem:

My car has exhaust smoke on start up.

Solution:

Rislone Engine Repair or Rislone Ring Seal Smoke Repair will reduce oil burning and eliminate smoking. 

[solution ref: 12]

Related Products:

Rislone Engine Repair (44110)

Rislone Ring Seal Smoke Repair (44416)


[Solution] How to quiet noisy lifters

Problem:

My car has noisy lifters.

Solution:

Rislone Engine Treatment quiets and smoothes engine operation and restores lost power.  Sludge and other deposits can clog lifter passages and make valves stick.  The unique cleaning and penetrating properties of Rislone Engine Treatment remove these deposits and lubricate to free sticky lifters and valves reducing noise.

[solution ref: 11]

Related Products:

Rislone Engine Treatment (44100)


[FAQ] Rislone Cylinder Compression Repair with Ring Seal

Problem:

Is this product compatible with engine treatments eg Moreys, Lucas?

Solution:

Yes this product will work with the treaments.

[faq ref: 4]

Related Products:

Rislone Compression Repair with Ring Seal (44447)


[FAQ] Rislone Injector Cleaner with Fuel Conditioner & Treatment

Problem:

Will this product work on all fuel types?

Solution:

Yes it will work on diesel, ethanol and unleaded.

[faq ref: 3]

Related Products:

Rislone Injector Cleaner with Fuel Conditioner & Treatment (44701)

Rislone Injector Cleaner with Fuel Conditioner & Treatment (4732)


[FAQ] Rislone Rear Main Seal Repair

Problem:

Will this product work on the 'wick' type seals?

Solution:

Yes this product will help with the 'wick' type seals.

Customer Feedback: "Used the Rear Main Seal Repair on an old Variant that had a leak coming from the seal area, after using this product the leak slowed then stopped"

Kevin
New South Wales

[faq ref: 2]

Related Products:

Rislone Rear Main Seal Repair (44240)


[FAQ] Rislone Power Steering Repair

Problem:

Will this product work with all transmission fluids?

Solution:

Yes it can!

[faq ref: 1]

Related Products:

Rislone Power Steering Repair (44650)


[Solution] How to fix engine oil leaks

Problem:

I have an engine oil leak.  What would be the right product to use?

Solution:

Rislone Engine Repair is your answer. It contains a combination of the best performance additives to repair the most common oil-related problems. Increases compression & horsepower; stops leaks, noise & smoking!

[solution ref: 10]

Related Products:

Rislone Engine Repair (44110)


[Solution] How to stop the slipping while shifting gears

Problem:

My transmission keeps slipping when I change gears.  How do I stop the slipping while shifting gears?

Solution:

Rislone Automatic Transmission Repair will stop your transmission from slipping when you shift gears. It will also prevent lazy shifts and reduce rough shifting.

[solution ref: 9]

Related Products:

Rislone Automatic Transmission Repair (44540)


[Solution] How to bring old jacks back to life

Problem:

My jack is old and worn out.  Is there a way of bring it back to life?

Solution:

Rislone Jack Oil with Stop Leak will bring life back to old jacks and prevent leaks and seepage on newer jacks.

[solution ref: 8]

Related Products:

Rislone Jack Oil with Stop Leak (HJ12)


[Solution] How to clean dirty and overheating radiators

Problem:

My radiator is overheating.  How can I fix that and prevent it from overheating?

Solution:

Rislone Super Radiator Flush cleans dirty radiators and removes all the deposits and build-up to get your cooling system factory clean to stop your radiator from overheating. It works on extremely dirty systems.

Alternatively, you can also use the Rislone Radiator 10 Minute Flush which is fast, easy and safe to use.

[solution ref: 7]

Related Products:

Rislone Super Radiator Flush (41201)

Rislone Radiator 10 Minute Flush (41211)


[Solution] How to seal larger cooling system leaks

Problem:

How do I seal larger cooling system leaks?

Solution:

Rislone Liquid Copper Block Seal Intake & Radiator Stop Leak seals larger leaks regular stop leaks won’t. One step formula permanently repairs leaks in gaskets, radiators, heater cores, intake manifolds, blocks, heads and freeze plugs. Use on cars, trucks, vans, SUV’s and RV’s.

[solution ref: 6]

Related Products:

Rislone Liquid Copper Block Seal Intake & Radiator Stop Leak (41109)


[Solution] How to seal cracked cylinder heads

Problem:

How do I seal cracked cylinder heads?

Solution:

Rislone Head Gasket Fix is the easist solution!  It contains a combination of sealing liquid and varous size gasket sealing particles which penetrate gaps and cracks to permanently stop leaks.

[solution ref: 5]

Related Products:

Rislone Head Gasket Fix (41111)


[Solution] How to seal leaky radiators

Problem:

My radiator is leaking! How do I stop this?

Solution:

Use Rislone Radiator Stop Leak 41194 (for 4 cylinders) or Rislone Radiator Stop Leak 41196 (for 6 or 8 cylinders) which should stop those annoying radiator leaks.

[solution ref: 4]

Related Products:

Rislone Radiator Stop Leak & Conditioner (41194)

Rislone Radiator Stop Leak & Conditioner (41196)


[Solution] How to stop exhaust smoke

Problem:

My exhaust is pumping out a lot of smoke! How do I stop that?

Solution:

Rislone Ring Seal Smoke Repair is the answer.  Not only it stops your exhaust smoke but it also quiets your engine noise.

[solution ref: 3]

Related Products:

Rislone Ring Seal Smoke Repair (44416)


[Solution] How to quiet engine noises and vibrations

Problem:

My engine has noises and vibrations. How do I make it go quiet and stop it from vibrating?

Solution:

The recommended product to use would be the Compression Repair with Ring Seal.  Available for 4, 6 and 8 cylinder engines.

[solution ref: 2]

Related Products:

Rislone Compression Repair with Ring Seal (44447)


[Solution] How to smooth out hard steering

Problem:

My steering feels stiff. How can I make it smoother?

Solution:

Rislone Power Steering Repair will smooth out the hard steering, restoring the performance and also stops morning sickness

[solution ref: 1]

Related Products:

Rislone Power Steering Repair (44650)


© Copyright Smits Group Pty 2017